Your Cart

All orders are processed in USD. While the content of your cart is currently displayed in CYN, you will checkout using USD at the most current exchange rate.

Out of stock

Some items are no longer available. Your cart has been updated.

Have a Coupon code?
Coupon code applied will be stored on your account
Subtotal
Discount

This discount code cannot be used in conjunction with other promotional or discounted offer.

Total
Taxes and shipping calculated at checkout
Enjoy Free Express Shipping on orders over $58.99

The Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair– no expensive equipment required.


Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength. 


Product Benefits:

  • The easy-to-melt welding rods are high-quality special rods that are mainly used for welding / brazing aluminum and aluminum alloys. However, they can also be used for hard welding non-ferrous metals other than stainless steel.
  • Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.

   
 

Welding Instructions:


Saker® Solution Welding Flux-Cored Rods

 

1. Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny.

2. Then evenly heat the area to be welded.

3. As you heat, rub the rod vigorously against the heated area until the rod starts flowing.

Caution: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds. 

Tacho Coronado ⭐⭐⭐⭐⭐

Just a few of the many parts that can be easily repaired!

✔️Aluminum Heads
✔️Fuel Tanks 
✔️Cast Iron Heads
✔️Manifolds
✔️A/C Lines
✔️Fenders
✔️Truck Beds
✔️Transmission Cases
✔️Radiators
✔️Generators
✔️Pot Metal Parts
✔️Irrigation Pipes
✔️Refrigeration
✔️Rivets
✔️Condenser Lines
✔️Aftercoolers
✔️Industrial Parts
✔️Aluminum Molds
✔️Truck Beds
✔️Timing Covers
 ✔️Mast               
✔️Complete Fabrication  
✔️Tool Boxes
✔️Aluminum Boats
✔️Seams
✔️Towers
✔️Ladders
✔️Cavitation Plates

Specifications:

  • Material: aluminum
  • Melting temperature: 380° C--400° C(716° F-- 752 ° F)
  • No leakage of gases or toxins, no lead material included.
  • Excellent corrosion resistance
  • Minimize the distortion of the starting material during welding.
  • Size: 33cm x 1.6mm. ( According to the manual measurement, there may be a subtle deviation. )

Package Includes:

  • 10 pcs Welding Rods(13g)
  • 20 pieces * Welding Rods(26g)
  • 100 pieces * Welding Rods(130g)
  • 200 pieces * Welding Rods(260g)

OUR GUARANTEE

📦 Insured Worldwide Shipping: Each order includes real-time tracking details and insurance coverage in the unlikely event that a package gets lost or stolen in transit.

💰 Money Back Guarantee: If your items arrive damaged within 15 days of normal usage, we will gladly issue out a replacement or refund.

🔒 Safe & Secure Checkouts: We use state-of-the-art SSL Secure encryption to keep your personal and financial information 100% protected.

The Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair– no expensive equipment required.


Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength. 


Product Benefits:

  • The easy-to-melt welding rods are high-quality special rods that are mainly used for welding / brazing aluminum and aluminum alloys. However, they can also be used for hard welding non-ferrous metals other than stainless steel.
  • Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.

   
 

Welding Instructions:


Saker® Solution Welding Flux-Cored Rods

 

1. Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny.

2. Then evenly heat the area to be welded.

3. As you heat, rub the rod vigorously against the heated area until the rod starts flowing.

Caution: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds. 

Tacho Coronado ⭐⭐⭐⭐⭐

Just a few of the many parts that can be easily repaired!

✔️Aluminum Heads
✔️Fuel Tanks 
✔️Cast Iron Heads
✔️Manifolds
✔️A/C Lines
✔️Fenders
✔️Truck Beds
✔️Transmission Cases
✔️Radiators
✔️Generators
✔️Pot Metal Parts
✔️Irrigation Pipes
✔️Refrigeration
✔️Rivets
✔️Condenser Lines
✔️Aftercoolers
✔️Industrial Parts
✔️Aluminum Molds
✔️Truck Beds
✔️Timing Covers
 ✔️Mast               
✔️Complete Fabrication  
✔️Tool Boxes
✔️Aluminum Boats
✔️Seams
✔️Towers
✔️Ladders
✔️Cavitation Plates

Specifications:

  • Material: aluminum
  • Melting temperature: 380° C--400° C(716° F-- 752 ° F)
  • No leakage of gases or toxins, no lead material included.
  • Excellent corrosion resistance
  • Minimize the distortion of the starting material during welding.
  • Size: 33cm x 1.6mm. ( According to the manual measurement, there may be a subtle deviation. )

Package Includes:

  • 10 pcs Welding Rods(13g)
  • 20 pieces * Welding Rods(26g)
  • 100 pieces * Welding Rods(130g)
  • 200 pieces * Welding Rods(260g)

OUR GUARANTEE

📦 Insured Worldwide Shipping: Each order includes real-time tracking details and insurance coverage in the unlikely event that a package gets lost or stolen in transit.

💰 Money Back Guarantee: If your items arrive damaged within 15 days of normal usage, we will gladly issue out a replacement or refund.

🔒 Safe & Secure Checkouts: We use state-of-the-art SSL Secure encryption to keep your personal and financial information 100% protected.

Customer Review

0
Based on 0 Reviews
5 (0)
4 (0)
3 (0)
2 (0)
1 (0)
WRITE A REVIEW

Your name

Email

Rating

Body of Review

THANK YOU FOR POSTING A REVIEW!

We value your input. Share your review so everyone else can enjoy it too.

    Next »
    ✨48% OFF✨Solution Welding Flux-Cored Rods

    Sale price USD $14.98 Regular price

    Sign in
    If you do not have an account, click Create AccountCreate Account